Skip to main content
Lighting Associates, Inc.
Monday, February 04 2013

The Monsoon™ Series:  VMON1  

The VMON™ series is designed as a dependable, sustainable platform dense-array SMD luminaire that you can rely on – use the VMON1™ for food service, hosedown, exposed, or rough-duty applications such as parking garages and canopies. It provides uniform, comfortable distribution without that annoying LED 'glare'.  The VMON1™ mimics fluorescent distribution, with a smooth uplight contribution. IP65/67, 1500 Psi hose-down rated, NSF food rated, and RoHS compliant.


One-piece compression-molded unsaturated polyester/fiberglass housing with (8) three-piece polycarbonate latches.  Seamless, continuously bonded poured-in-place neoprene gasket.  Power Supply gear tray/LED heatsink snaps into fixture body and captures all wiriing within organized containment.  1/2" hole in each end of housing with weather tight plugs.  IP67 & NSF Food Rated.


Nominal 12" circuit boards contain 24 proprietary Low power, high efficiency 114 lumen/Watt, 85CRI red/green phosphored blue-sapphire substrate SMD diodes, arranged in a parallel row small form optical array for uniformity and consistency of distribution. Loss of one diode will not affect any others in fixture. Each board contains two rows of 12 LEDs for two circuit, allowing bi-level control via two switch legs. Integral HPF electronic 120-277V multivolt input, 18VDC output, Class II listed power supply.  L70 =>100,000 hrs. UL/CUL Wet Location Listed.


LEDs produce 120 degree beam spread, on-axis single point luminous intensity value. Impact -modified Lexan® stablized, etched polycarbonate linear-ribbed lens for broad, uniform distribution with nomial 10% uplight component.


The VMON1TM is provided with pair of Quick-clips™ snap-on full-hard stainless steel mounting clips that will accept #12 S-hook & chain or 1/4" threaded rod, as well as allow surface mounting without penetrating fixture body.  Quick-clips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 100x the VMON1™ weight.

Fixture Weight

VMON1™ 4-foot length: 4 lbs. 2 oz.

Posted by: AT 02:42 pm   |  Permalink   |  Email
    Focused On The Future Of Lighting.

    Lighting Associates
    5021 Tamara Lane
    West Des Moines, Iowa 50265

    Telephone  515/222-9604

    Copyright 2012 Lighting Associates, Inc.