|
Tuesday, February 19 2013
Tools for Lighting
Inter-lux provides access to a group of lighting manufacturers dedicated to bringing high design and high-quality products to domestic and international projects. Our partners are accredited and capable of supplying high-quality lighting solutions to any country in the world.
All Inter-lux manufacturers are CUL or CETL certified to produce products compliant with U.S. and Canadian standards. The products come assembled and labeled from the factory to be direct shipped to the jobsite anywhere in the world.
www.inter-lux.com/manufacturer/alm/ring/
Tuesday, February 19 2013
The Monsoon™ Series: VMON1
The VMON™ series is designed as a dependable, sustainable platform dense-array SMD luminaire that you can rely on – use the VMON1™ for food service, hosedown, exposed, or rough-duty applications such as parking garages and canopies. It provides uniform, comfortable distribution without that annoying LED 'glare'. The VMON1™ mimics fluorescent distribution, with a smooth uplight contribution. IP65/67, 1500 Psi hose-down rated, NSF food rated, and RoHS compliant.
Housing
One-piece compression-molded unsaturated polyester/fiberglass housing with (8) three-piece polycarbonate latches. Seamless, continuously bonded poured-in-place neoprene gasket. Power Supply gear tray/LED heatsink snaps into fixture body and captures all wiriing within organized containment. 1/2" hole in each end of housing with weather tight plugs. IP67 & NSF Food Rated.
Electrical
Nominal 12" circuit boards contain 24 proprietary Low power, high efficiency 114 lumen/Watt, 85CRI red/green phosphored blue-sapphire substrate SMD diodes, arranged in a parallel row small form optical array for uniformity and consistency of distribution. Loss of one diode will not affect any others in fixture. Each board contains two rows of 12 LEDs for two circuit, allowing bi-level control via two switch legs. Integral HPF electronic 120-277V multivolt input, 18VDC output, Class II listed power supply. L70 =>100,000 hrs. UL/CUL Wet Location Listed.
Optics
LEDs produce 120 degree beam spread, on-axis single point luminous intensity value. Impact -modified Lexan® stablized, etched polycarbonate linear-ribbed lens for broad, uniform distribution with nomial 10% uplight component.
Mounting
The VMON1TM is provided with pair of Quick-clips™ snap-on full-hard stainless steel mounting clips that will accept #12 S-hook & chain or 1/4" threaded rod, as well as allow surface mounting without penetrating fixture body. Quick-clips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 100x the VMON1™ weight.
Fixture Weight
VMON1™ 4-foot length: 4 lbs. 2 oz.
www.thelightedge.com/product/vmon1
Friday, February 08 2013
 Product Used  ALX2 Series
 Product Used  ALX2-HBP
 Product Used  ALX2-MB
 Product Used  ALX1-RL
 Product Used ALX2-HBP
 Product Used  ALX3-CB
www.primuslighting.com/index.html
Thursday, February 07 2013
Wednesday, February 06 2013
Tuesday, February 05 2013
Monday, February 04 2013
09 P60 Linear Plaster-in FL/LED
A 2.4 inch recessed linear luminaire with flush trim for absolute minimal visual impact. Snap-in acrylic diffuser with flush position.
Applications:
- Trimless, plaster-in for drywall ceilings and walls.
- Installation from below for remodel or new construction.
Features:
- Single lamp configuration.
- Overlapping lamp standard.
- Easily installed internal ballast tray assembly.
- Tool free lamp maintenance.
- Internal ballast trays with pre-wired plug connectors.
- Snap-in opal polycarbonate diffuser.
- Powdercoat painted white – RAL 9010.
- Flush lens position.
www.inter-lux.com/manufacturer/whitegoods/p60-linear-plaster-in-downlight/
Monday, February 04 2013
The Monsoon™ Series: VMON1
The VMON™ series is designed as a dependable, sustainable platform dense-array SMD luminaire that you can rely on – use the VMON1™ for food service, hosedown, exposed, or rough-duty applications such as parking garages and canopies. It provides uniform, comfortable distribution without that annoying LED 'glare'. The VMON1™ mimics fluorescent distribution, with a smooth uplight contribution. IP65/67, 1500 Psi hose-down rated, NSF food rated, and RoHS compliant.
Housing
One-piece compression-molded unsaturated polyester/fiberglass housing with (8) three-piece polycarbonate latches. Seamless, continuously bonded poured-in-place neoprene gasket. Power Supply gear tray/LED heatsink snaps into fixture body and captures all wiriing within organized containment. 1/2" hole in each end of housing with weather tight plugs. IP67 & NSF Food Rated.
Electrical
Nominal 12" circuit boards contain 24 proprietary Low power, high efficiency 114 lumen/Watt, 85CRI red/green phosphored blue-sapphire substrate SMD diodes, arranged in a parallel row small form optical array for uniformity and consistency of distribution. Loss of one diode will not affect any others in fixture. Each board contains two rows of 12 LEDs for two circuit, allowing bi-level control via two switch legs. Integral HPF electronic 120-277V multivolt input, 18VDC output, Class II listed power supply. L70 =>100,000 hrs. UL/CUL Wet Location Listed.
Optics
LEDs produce 120 degree beam spread, on-axis single point luminous intensity value. Impact -modified Lexan® stablized, etched polycarbonate linear-ribbed lens for broad, uniform distribution with nomial 10% uplight component.
Mounting
The VMON1TM is provided with pair of Quick-clips™ snap-on full-hard stainless steel mounting clips that will accept #12 S-hook & chain or 1/4" threaded rod, as well as allow surface mounting without penetrating fixture body. Quick-clips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 100x the VMON1™ weight.
Fixture Weight
VMON1™ 4-foot length: 4 lbs. 2 oz.
www.thelightedge.com/product/vmon1
|
|
